Application for

Weld Procedure Qualification Testing

Step 1 of 11

Contact Details

Client Name* (ID: ClientName)

Contact Name* (ID: ContactName)

Address* (ID: Address)

City* (ID: City)

Country* (ID: CountryIso)

Email* (ID: ContactEmail)

Phone* (ID: ContactPhone)

Preferred Date (ID: PreferedStartDate)

Number of days Required (ID: DaysRequired)

pWPS/WPS Number (ID: pWPS_WPSNumber)

WPQR Number Please note this reference will be on all Traceable documentation for WPQR (ID: WPQRNumber)

Testing Standards

ISO 15614-1

ISO 15614-2

ISO 15613

ASME IX

AWS D1.1

(ID: StandardArray[])

Additional standard if applicable

ISO 15614-1

ISO 15614-2

ISO 15613

ASME IX

AWS D1.1

(ID: AdditionalStandard[])

Client Specification or Code of Practice (ID: ClientSpecification)

Application Standard (ID: ApplicationStandard)

PESR 2016 or PED Certification Required?

Yes

(ID: PESRorPED)

Welding process *EN ISO 4063

MMA

111

(ID: WeldingProcess[])

TAG

121

122

124

125

126

(ID: WeldingProcess[])

MIG/TAG

131

132

133

135

136

138

(ID: WeldingProcess[])

TIG

141

142

143

145

146

147

(ID: WeldingProcess[])

Other (ID: WeldingProcess_other)

Welding Position(s) for testing *EN ISO 6947/AWS

PA/1G

PC/2G

PE/4G

PF/3G

PG/3G

PH/5G

PJ/5G

H-LO45/6G

H-LO45/6G(R)

J-LO45/6G

(ID: WeldingPositionArray[])

Are Your Welding Processes...

Manual

Mechanised/Automatic/Robotic

(ID: WeldingProcessType)

Side 1

Type

Pipe

Plate

Other
(Enter below)

(ID: Side1Type)

Other Type (ID: Side1Type_other)

Material Grade (ID: Side1MaterialGrade)

Diameter (mm) (ID: Side1Diameter)

Thickness (mm) (ID: Side1Thickness)

Joint

Type

Butt

(T) Butt

Branch

Fillet

Other
(Enter below)

(ID: JointType)

Other Joint (ID: JointType_other)

Side 2

Type

Pipe

Plate

Other
(Enter below)

(ID: Side2Type)

Other Type (ID: Side2Type_other)

Material Grade (ID: Side2MaterialGrade)

Diameter (mm) (ID: Side2Diameter)

Thickness (mm) (ID: Side2Thickness)

Filler Material Grade(s) (ID: FillerMaterialGrade)

Additional Information (ID: AdditionalMaterialInformation)

Is PWHT required?

Yes

(ID: isPwhtRequired)

NECIT to arrange PWHT?

Yes

(ID: isNecitArrangingPwht)

Heating Rate (°C/hr) (ID: HeatingRate)

Holding Temp (°C) (ID: HoldingTemperature)

Holding Time (Hours) (ID: HoldingTime)

Cooling Rate (°C/hr) (ID: CoolingRate)

NECIT to arrange NDT?

Yes

(ID: NecitToArrangeNDT)

Inspection / Quality Level (ID: InspectionLevel)

Minimal hold period between welding and NDT (ID: MinimumHoldPeriod)

NECIT as an ISO 17020 Inspection body, shall conduct Non-Destructive Testing to the minimum requirements of the applicable WPQR or Application standard. Should you require any additional NDT Conducted, Please Detail below (ID: NDTStandardDeviation)

NECIT to arrange Mechanical testing?

Yes

(ID: NecitToArrangeMechTesting)

Please provide specific information relating to your WPQR mechanical testing Criteria

Min Tensile (MPa) (ID: MinimumTensileStrength)

Guidance:
The tensile strength of the test specimen shall not be less than the corresponding specified minimum value for the parent metal unless otherwise specified prior to testing.

For dissimilar parent metal joints, the tensile strength shall not be less than the minimum value specified for the parent material having the lowest tensile strength.

Impact Test Temperature (°C) (ID: ImpactTestTemperature)

Guidance:
Can be found on the Parent material Certificate unless specified by Customer specification or contract requirements

Max Hardness (HV10) (ID: MaxHardness)

Guidance:
ISO 15614-1 Table 3

Macro Specific Info (ID: MacroSpecificInfo)

Guidance:
If non Standard joint, Please advise of the joint design which assists the laboratory in interpretation.

Depth of Penetration Requirements

NECIT as an ISO 17020 Inspection body, shall conduct Non-Destructive Testing to the minimum requirements of the applicable WPQR or Application standard. Should you require any additional Mechanical testing Conducted, Please Detail below (ID: StandardDeviation)

NECIT Are able to offer quotations for Premium testing options detailed below. The below are on application only and do not come standard and must be agreed in writing during the quotation stage. In order for premium testing to be conducted the date of welding must be agreed in advance

PWHT

24 Hour

48 Hour

(ID: PT_PWHT)

NDT (VT/PT/MT/UT)

Same Day

24 Hour

48 Hour

(ID: PT_NDT)

Mechanical Testing

Same Day

24 Hour

48 Hour

(ID: PT_Mech)

Type

Electronic

Paper

Both

(ID: CertificatePrint)

Do your require a Welder Qualification?

Yes

(ID: RequireWelderQual)